How to build a Kitchen Table Chairs. There are many patterns for a kitchen table. This is a simple, inexpensive, small table for two.
Cut four legs about 35 inches long from 2×2 woods. Get a piece of wood that measures 2 ft. X 2 m. X 3/4 inches thick for the table top. Sand wood with light sandpaper until all sharp edges are gone and flat surfaces are smooth when touched. Buy 8 L-shaped metal brackets 2 inches long on each branch of “L.”Get a package with 1-inch-long, size 8 wood screws. Screw a bracket onto each leg. Place the holder on the end of the leg so that the bend of the bracket is level with the end of the piece of wood. Turn the leg 90 degrees and screw in a second bracket. Repeat with each leg. Get a few screws 1/4 to 2/1 inches shorter than the thickness of the table kitchen top.
Place the table top on the floor with the top down. Place a table leg, bracket facing down, on the table corner. Align the edge of the leg with the edge of the table top. Hold the bracket down on the table top and screw one of the screws through the hole in the bracket. Screw the other bracket into the table top. Repeat with all four legs. Shake the table to control movement. Color or stain the table any color. Allow to dry overnight before using the table chair kitchen.